Home > Products > Pro Series > ZM-G85
The Acoustic 85 Glass movable wall system can create silence with a panel thickness of only 85mm. It is extremely easy to operate and completely user friendly. There are no limits on parking layouts and countless design surfaces to choose from.
As with the name, Acoustic 85 can provide sound insulation upto 38 dB. The height of walls can be up to 4.5 meters. The standard panel width is 1200mm, but the wide panels of more than 2000mm are often produced on special request without any problem. Single pass doors can be integrated into acoustic 85 walls. if required.
We have different tacks and roller types to accommodate panels depending on the weight and height of the panels.
The Acoustic 85 is a movable wall system hung from a top track, without floor guides, consisting of independent panels that are moved manually. The panels are constructed around an aluminium/MS frame, on both sides of which 12mm minimum thickness MDF boards are acoustically free hung. Panel-thickness is +- 85 mm. Acoustic ratings available STC 39 (39 dB).
Each panel is provided with a retractable spring tensioned seal at the top and bottom, with a pressure of 1500N. The seals are pressed against the underside of the aluminium track at the top and against the finished floor at the bottom, by manually operating an internal spindle mechanism with Bevel gear system. The seals are aluminium based and designed to overcome small deviations in the floor, to achieve high acoustic values and ensure a rigid closure.
The aluminium nose and counter profiles ensure tight closure between the panels by magnetic strips with 55N pressure per linear meter and rubber seals. These vertical profiles can be exposed, to give protection to the edges of the panel, or can be inlaid (recessed) so they are not visible when the wall is closed.
Recess Folding Panel
The closing panel of the wall is a folding panel. This panel has a lever handle to operate on both side. It is operated, together with the top and bottom seals, by an internal three-way spindle Bevel gear mechanism.
Pass door panel
Single, or double pass door panels, are constructed with a MS frame with anti-rust coated. The frame legs (jambs) incorporate retractable seals for complete and tight closure to the floor. As an option they can be supplied also with a floor bolt and tube. The seals in the frame legs, and at the top of the panel, are manually operated by an internal mechanism. This mechanism also locks the door when the panels are being moved. The bottom seal of the door leaf is automatically activated and can be adjusted to the correct stroke. With a double pass door, one half (the active leaf) is used as a standard door, mortise lock with handle, the other (the passive leaf) has no handles, and normally used only when the active leaf is open.
Every panel is suspended by one, or two, trolleys which run in an aluminium ceiling track. These maintenance free trolleys are of a multiple ball bearing type, The trolleys are connected to the panel by means of a steel trolley bolt.
All panels can be adjusted for height without opening the ceiling, or the panel.
Baffiling with MS structutre
Sound baffles of above the substructure with 12mm thk plywood/12mm thk gypsum board on either sides of the MS frame work with rock wool of 64kg/m3 Density insulation in between the plywood /gypsum board (Above the false ceiling).Provide around trim
as per the architect requirement. The board shall be jointed and finished to have a flushed look by filling and finishing with proprietary supplied jointing tape.
The Acoustic 100 movable wall system can create silence with a panel thickness of only 107mm. It is extremely easy to operate and completely user friendly. There are no limits on parking layouts and
countless design surfaces to choose from. As with the name, Acoustic 100 can provide sound insulation up to 55 dB. The height of walls can be up to 15 meters. The standard panel width is 1200mm,
but the wide panels of more than 2000mm are often produced on special request without any problem.